Part No. |
Chassis,
Wheels & Brakes |
Price |
| 41551-41 |
Rear
axle; 45 solo 1941-52, NOS |
55.00 |
| 41575-30 |
Rear
axle adjusting screw set; 45 solo 1937-52, 2 screws & 2 nuts, cadmium
plt. |
9.50 |
| 41601-36 |
Rear
axle nut kit; 45 solo 1937-52, includes 2 nuts, collar & lock,
cadmium plt. |
22.00 |
| 41670-35 |
Brake
cam & shaft, rear; 45 solo 1935-52, NOS |
19.00 |
| 42430-36 |
Brake
pedal stud; all models, replace that sloppy, worn stud with a factory-new
one (has to be peened in, etc.), NOS |
6.00 |
| 43530-35 |
Wheel
mounting screw; all wheels using "star" hubs (except 45 solo front),
set of 5 |
8.00 |
|
7811 |
Front axle nut kit; 45 solo 1937-52, G 1937-40, contains special nuts &
2 cotter pins. Cadmium plated |
6.00 |
|
7923 |
Front
axle nut kit; 45 G 1941-57, WLC 1943, all UL and others with star hub
& springer brake, contains 2 special nuts & 1 cotter pin |
9.50 |
| 44122-30 |
Brake
shell, front; 45 solo 1935-52, G 1937-40, NOS |
35.00 |
| 44183-36 |
Brake
drum grease seal kit; all UL, 45 G 1941-57 (springer brake), contains
cork seal, steel washer & spring |
8.00 |
| 44427-35 |
Brake
lining; 45 solo 1937-40 rear, 1937-52 front; G 1937-40 front with rivets,
NOS |
10.00 |
| 44433-39 |
Brake
lining; springer drum (also ServiCar rear 1939-50) |
12.00 |
| 45668-30A |
Rocker
bushing set; 45 solo 1937-52, G 1937-40, set of 4, NOS (if worn will
cause wheel wobble & other handling problems) |
35.00 |
| 47583-29 |
Seat
post bushing: all 45 & VL (if this is worn, your seat & seat
post will wobble) |
13.00 |
| 47583-36 |
Seat
post bushing; all UL (fits all big twin rigid frames 1936-57) |
16.00 |
| 49571-39 |
Rear
stand mounting kit; 45 solo 1939-52, UL 1939-48, includes cadmium plated
special bolts, etc. |
12.00 |
| 50510-32 |
Footboard support rod set; 45 solo 1932-52, Servi-Car 1933-50, 1 each front & rear rods
|
42.00 |
| 56270-10C |
Handlebar
control rebuild kit: all models 1937-48 (Springer bars). Includes hardened
pin, rollers, etc. to tighten up spark & throttle |
12.00 |
| 56270-54C |
Handlebar
control rebuild kit: same as above for 'Glide bars |
11.00 |
| 56287-36 |
Handlebar
end nut; all springer bars, parkerized, NOS |
3.50 |
| 58000-49 |
Windshield
frame, complete; all 'Glide models 1949-*, used |
50.00 |
| 59767-41 |
Rear
fender top brace; 45 solo 1941-52, heavy-gauge steel with rivet holes,
very useful for mounting Sportster or custom fender (has correct offset),
NOS (very few left!) |
25.00 |
| 60504-32B |
Primary
cover: All 45, 1937-63 ('64-73 adapted), original style with 2 small
inspection holes; black gloss finish |
87.00 |
| 60504-32C |
Primary
cover: All 45, 1937-63 ('64-73 adapted), original style with 2 small
inspection holes; chrome finish |
90.00 |
| 60505-32B |
Primary
cover: All 45, 1937-63 (also '64-73, if notched for electric-start),
requires separate derby cover; black gloss finish |
75.00 |
| 60505-32C |
Primary
cover: All 45, 1937-63 (also '64-73, if notched for electric-start),
requires separate derby cover; chrome finish |
80.00 |
| 60545-36 |
Inner
primary cover re-inforcement ring; all big twin 1936-54, adds rigidity
and prevents cover breakage. |
4.50 |
| 60621-41B |
Primary
cover, inner; 45 1941-63 ('64-73 if notched for electric-start); black
gloss finish |
32.00 |
| 60621-41C |
Primary
cover, inner; 45 1941-63 ('64-73 if notched for electric-start); chrome
finish |
35.00 |
| 64450-41 |
Tool
box mounting bracket; 45 solo 1941-52 |
25.00 |
| 64470-35 |
Tool
box mounting kit; all 45 & UL, contains all cadmium plated hardware
to attach tool box to stock frame bracket |
13.50 |
| 65400-37 |
Exhaust
pipe heat shield; chrome, easily installed, attractive, prevents leg
burns, pair, with brackets |
9.00 |
